Question 1

Do you take on both residential and commercial work under structural and building envelope services?

Accepted Answer

Yes. Our roofing work spans both residential and commercial buildings. Our structural steel framing work is primarily commercial and mixed-use. Both services are delivered to the same engineered, code-compliant standard regardless of project type.

Question 2

How do roofing and structural steel framing fit together as a combined service?

Accepted Answer

Both are envelope and structure-grade services that require engineered specifications, proper approvals, and disciplined installation, which is why they sit together. Whether we're protecting a building from the outside in with a roofing system or building the structural frame from the ground up, the underlying standard is the same.

Question 3

How do I get a quote for structural or building envelope work?

Accepted Answer

Contact us to start with a consultation. We'll review the scope, the site, and any existing drawings or engineering, then put together a detailed proposal with honest numbers before any work begins.

Question 4

Do you manage permits and inspections for these services?

Accepted Answer

Yes. We manage the permitting process and coordinate inspections with the relevant authorities across Greater Vancouver, Vancouver Island, and the Fraser Valley.

Question 5

Do you handle both residential and commercial roofing?

Accepted Answer

Yes. We work across both, from pitched residential roofs to low-slope commercial membrane systems. The materials and installation methods differ, but the standard we hold ourselves to doesn't.

Question 6

What roofing systems do you install?

Accepted Answer

We work with a range of systems selected based on the building type, slope, climate exposure, and budget. For residential projects this typically includes asphalt shingle, metal, and torch-on systems. For commercial, flat and low-slope membrane systems including TPO and modified bitumen. We'll recommend what's right for your specific situation during pre-construction.

Question 7

How do you handle flashing and waterproofing details?

Accepted Answer

Carefully. The majority of roofing failures trace back to poor flashing and transition details, not the membrane itself. We treat every penetration, edge, and transition as a critical point in the installation and don't cut corners on waterproofing practices.

Question 8

Do you offer warranties on your roofing work?

Accepted Answer

Yes. Extended warranty options are available on qualifying installations depending on the system and manufacturer. We'll walk you through what's available and what it covers during the pre-construction phase.

Question 9

How do I know when my roof needs replacing versus repairing?

Accepted Answer

We can assess that during an initial consultation. In some cases a targeted repair extends the roof's lifespan significantly. In others, the underlying condition of the substrate or membrane means a full replacement is the more cost-effective long-term solution. We give you an honest picture either way.

Question 10

What kinds of structural steel framing projects do you take on?

Accepted Answer

We handle structural steel framing for commercial buildings, mixed-use developments, and larger residential projects where steel is specified as the primary structural system. If your project has engineer-stamped drawings calling for structural steel, we can work from that documentation and manage the installation through to inspection sign-off.

Question 11

How do you ensure seismic compliance on structural steel projects?

Accepted Answer

Seismic compliance is built into our process from the start. We work from engineer-approved connection details, coordinate with the structural engineer of record throughout installation, and carry out inspections at key milestones to confirm the work meets the approved drawings before proceeding to the next stage.

Question 12

Do you work with the structural engineer directly or do we need to coordinate that ourselves?

Accepted Answer

We work directly with the structural engineer of record throughout the project. You don't need to manage that coordination yourself. If you don't yet have an engineer retained, we can advise on that during pre-construction.

Question 13

What does the quality assurance process look like on a steel framing project?

Accepted Answer

We carry out inspections at defined stages throughout the erection process, not just at the end. Connection details, anchor bolts, and critical structural elements are verified against the engineer-approved drawings as the work progresses, so issues are caught and resolved before they become expensive problems.

Question 14

How early should I bring GP Contracting Group into a structural steel project?

Accepted Answer

As early as possible. Getting us involved during pre-construction means we can review the drawings, flag any constructability concerns, confirm material lead times, and build a realistic schedule before work begins. Structural steel projects that run into problems mid-erection are almost always the result of insufficient pre-construction planning.

Structural & Building Envelopein Greater Vancouver, Vancouver Island & the Fraser Valley

Why GP Contracting Group

Roofing

Roofing — Common Questions

Steel Framing

Steel Framing — Common Questions

General Questions

Related Specialized Services